Textilindustrin står inför stora utmaningar när det kommer till forskning, utveckling ochproduktion på ett miljöanpassat och socialt ansvarsfullt sätt. Ökat miljömedvetetande hoskonsumenten har lett till ökat intresse och möjlighet för företaget att arbeta mot ett hållbartföretagande.Examensarbetet är skrivet som en del av kandidatexamen i textilingenjörsprogrammet föruppdragsföretaget BlåKläder AB och utfördes för att även kunna fungera som ett underlag förandra företag i avsikt med att påbörja/utveckla sitt arbete med socialt ansvarstagande.I arbetet presenteras miljöpåverkan av en arbetsbyxa i bomull från råväv till distribuering.Fyra miljöbelastande kategorier har tagits med i undersökningen, där mängden av kemikalie,vatten- och energiåtgång samt koldioxidutsläpp räknades ut per arbetsbyxa av minimumorder. Sammanställning av resultat visar att det används 2,5 kg kemikalier, 10,3 liter vatten,756 Wh energi och det släpps ut 0,4 kg kodoxid vid tillverkning av en arbetsbyxa.Rapporten behandlar och beskriver produktion av en rå bomullsväv medflamskyddsbehandling. Processflödet för hela behandlingsförloppet analyseras i arbetet därbåde kemikalier, energi- och vattenåtgång tas upp vid varje delprocess. Koldioxidutsläppanalyseras som en särskild del av rapporten och omfattar de direkta utsläppen av tung lastbiloch fraktfärja.

This review paper summaries scientific research about horse thermoregulation and the consequences of using a blanket. Horse owners put blankets on their horses to protect them when they are clipped, to protect them from bugs, to keep them clean and so on. This can have consequences for the horse which their owners might be unaware of. I have tried to answer following questions by searching the available scientific literature; ? How can the horse maintain thermoregulation? ? Is there a risk of suffering when horses wear a blanket? ? Is there a risk of suffering when horses do not wear a blanket? ? How can animal inspectors estimate the welfare of horses when they wear or do not wear a blanket? My result shows that horses who wear a blanket have an increased risk of becoming overheated, develop a chafing, have an increased exposure hazard and have a restrained natural behaviour.

This project has as main goal to study the influence of the coating thickness, deposited by arc-PVD- technology, on the wear resistance of coated cemented carbide inserts in three different turning operations. An additional effort has also been made to develop a new test method for evaluating flank wear resistance. Three different coating types (Coating A, Coating B and Coating C) have been studied in three distinctive thicknesses (2, 4 and 6 µm) for each type. For two of the coating types (Coating A and B) special studies has been done with the thickest coating, creating two additional coating versions of the thickest coating, by changing various deposition parameters, with the aim to enhance the cohesive properties of the coating and lower the residual stresses at the cutting edge. The results show increased crater wear resistance with increased coating thickness for all coating types, but the amount of increase changes with coating type (Coating A>B>C).

During this master thesis, wear and friction properties for the high-temperature alloy Kanthal APMT were studied. The results were also compared to 253MA. The initial tests showed, among other things, that the surface fineness of the muffle tubes matters in real applications like conveyor belts. A 253MA-sample wear-tested against a 253MA-tube showed lowest wear at 900°C while a pre-oxidized APMT-sample wear-tested against a APMT-tube had the lowest mean value of the friction force at 1100°C, compared to all other tests..

This report discusses questions concerning wear on forest roads. The purpose of the work is to investigate if the wear on the roads will decrease when the speed limit gets lower for the trucks that transport the wood. A normal forest road, class B, was used in the study. In total 5000 m3f timber was transported on the road. Data about the road was measured with a profilograph car before and after the timber transport.

Aim: The aim of this study was to examine and explain the various methods available to rate the erosion damage, and on which teeth and tooth surfaces of erosion damage mostly occurs in children and adolescents.Method: A literature review was conducted, based on 15 scientific articles that have been reviewed, evaluated and analyzed. Articles were searched for in the database PubMed.Result: Six of the articles used the TWI (tooth wear index), which is an index to diagnose the tooth wear in the primary and permanent dentition. Eight articles used other indices as they considered that the TWI was not sufficiently developed to register the degree of tooth wear on some teeth. Tooth wear in the primary dentition occurs most often in the canines and incisors. Tooth wear in the permanent dentition was found in the literature to be mostly occurring on the occlusal / incisal surfaces of all teeth and tooth surfaces.LyssnaConclusion: There is no common index in the articles but many of them use the TWI.

The agricultural plantingmachines are used just a few weeks every year. That means that the supply of service and spare parts have to be good to make the timeliness costs low at the agricultural hard working periods. The machines wear down successivly when they are used. The wear is harder on some parts than the others on a machine. Spare parts can be dicided into consumables.

Nowadays naval units are participating in international missions, where new and in many cases tougher conditions will affect their propulsion. This essay deals with some of the now developed nanostructure coatings and gives a presentation of how the coatings could function on some exposed parts of the naval powertrain. The essay investigates the possibility that the coatings can be used as a protective layer that will reduce or prevent wear on selected parts of the naval powertrains. As a basis for the essay, nanotechnology is described, as well as different reasons that wear occurs and application techniques for coatings The conclusion is that nanostructured coatings can be applied and provide a much better result on hardness and wear resistance as of naval powertrains compared to micro-structural coatings, both for manufacturing and renovation. The essay presents a few examples of the military utility of the nanostructure coatings as well as suggestions for further research..

Formulation and testing of a new type of chainsaw lubricantThe company Agro Oil has come up with the idea of developing an environmentally adapted chainsaw lubricant with a new unusual base fluid. A field test with a tree-harvester shows unsatisfactory low temperature properties and high wear. In this work the viscosity, price and pour point of different combinations of the given base fluid and three other base fluids have been investigated. Desired viscosity and price are determined for different formulations. The new lubricants tested show lower pour points than almost all products on the Swedish market.A test equipment has been developed to investigate the wear.

Volvo Cars in Skövde manufacture and assemble Volvo engines. When attaching the ignition coil to all 4-cylinder engines, a special mounting tool is required. This mounting tool is currently manufactured from injection-molded polyoxymethylene (POM), a thermoplastic. It has been noted that the life span of the tool is shortened as a result of abrasive wear that occurs during the attachment process of the ignition coil.An investigation of the possibility of manufacturing the mounting tool with a 3D-printer is undertaken in cooperation with ÅF, a consultant to Volvo Cars. A literature study is first presented to introduce broader knowledge on the subject.

Nowadays naval units are participating in international missions, where new and in many cases tougher conditions will affect their propulsion. This essay deals with some of the now developed nanostructure coatings and gives a presentation of how the coatings could function on some exposed parts of the naval powertrain. The essay investigates the possibility that the coatings can be used as a protective layer that will reduce or prevent wear on selected parts of the naval powertrains. As a basis for the essay, nanotechnology is described, as well as different reasons that wear occurs and application techniques for coatings The conclusion is that nanostructured coatings can be applied and provide a much better result on hardness and wear resistance as of naval powertrains compared to micro-structural coatings, both for manufacturing and renovation. The essay presents a few examples of the military utility of the nanostructure coatings as well as suggestions for further research..

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

To be able to give optimal care to patients in small animal hospitals, we have to have knowledge about how to prevent the spread of infection. An important part in this is hand hygiene routines. We have to clean hands whenever they are visibly dirty, and disinfect them regularly in between. Another important part is the cleaning and disinfection of the environment in the clinic, and also the cleaning, disinfection and sterilization of medical instruments. Other important parts are isolation of patients with known infections, to wear clothes with short sleeves and to wash them at least once daily, to wear gloves, having short nails and not wearing jewelry when working.

Our common future involves many important challenges. People and nature need to improve the relationship in order to reach an ecologically sustainable development. In a society where consumption of products steadily increases, the consumer awareness about social and environmental issues connected to the products becomes an importent factor. More and more companies choose to work more actively with these issues and more and more products get labelled by some of the eco labelling organisations. From the cradle to the gate means that a study has been done on a part of a products life cycle.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.